This overload protection device was developed to be used on the output table of the SANDEX α Series. It has a large diameter hollow bore that allows use of the fixed shaft in the center of the α Series. It is also suitable as a safety device for the output table on an assembly chassis. 
Large Diameter Type
The large diameter design with hollow center bore makes this model suitable for protecting tables and for mounting on indexers with fixed center shafts.
Ideal for the SANDEX α (Alpha) Series
Optimized to fit the SANDEX α Series, our all-in-one drive and indexing unit.
High Accuracy
Excellent trip torque accuracy
Easy to Adjust
Trip torque can be adjusted by simply turning the adjustment nut.
No Play
Zero backlash
| Characteristics | Unit | 7TAD | 9TAD | 11TAD | 15TAD | 19TAD | 23TAD |
| Trip Torque Adjustment Range | N・m | 40 to 250 | 60 to 450 | 90 to 600 | 300 to 2200 | 600 to 4500 | 1200 to 5500 |
| Torque Adjustment Nut Thread Pitch | mm | 2 | 2 | 2 | 2 | 2 | 2 |
| Max Allowable Radial Load | N | 2450 | 5200 | 7300 | 11800 | 16800 | 24800 |
| Max Allowable Thrust Load | N | 2950 | 5000 | 7000 | 12000 | 17000 | 35000 |
| Max Allowable Moment | N・m | 45 | 100 | 180 | 430 | 750 | 1950 |
| Max Allowable Rotation Speed | rpm | 200 | 200 | 200 | 140 | 120 | 100 |
| Moment of Inertia | kg・m2 | 0.02 | 0.07 | 0.15 | 0.8 | 2.1 | 4.5 |
| Mass | kg | 4.5 | 9.6 | 15 | 43 | 74 | 110 |
* Product specifications and dimensions are subject to change without notice. Confirm details when ordering.
